Laser Engraving

[high powered beam removes small bits of material to create a desired design]

Laser Engraving:

  • Various Mediums
  • Quick Turnaround
  • Laser Precision

Call A.M. Metal Finishing at 407-843-0182 for all your finishing needs.

Laser Engraving in Orlando

Laser engraving and laser marking are new and modern techniques to imprint numbers, letters, logos, and symbols into a wide range of materials. At A.M. Metal Finishing our laser experts can perform most any engraving or marking job – big or small.

Our laser emits a high-powered beam that removes small bits of the material to create the desired design. The laser is controlled by our state-of-the-art computer which controls the beam on an axis. This results in the ability to reproduce virtually any image with great detail. 

Laser Engraving and Laser Marking Benefits

The biggest advantage of laser engraving is accuracy. The computer-controlled laser is highly suitable to reproduce images many times, so there are no flaws within identical parts. Lasers also do not have parts that need to be replaced often. This avoids impurities in the engraving. One last big advantage is that parts do not have to be strapped or held down, which avoids damaging the parts during the laser engraving process.

For more information about Laser Engraving in Orlando, or Laser Marking, please contact A.M. Metal Finishing, Inc.

Why Select A.M. Metal Finishing for Your Laser Engraving?

Simple. Save money and receive quality! By choosing us for your engraving needs, you will save money and time with less shipping. Plus, we offer bundled prices. Get your desired engraving and marking needs along with our other quality processes done in one place, on one invoice! Our quality standards will always be met as usual.

If you need more information about laser engraving services in Orlando, contact us or fill in our online quote form.

Fun Fact

Kevlar can be laser-engraved and laser-cut. However, Kevlar gives off extremely hazardous fumes (cyanide gas) when it is vaporized.

Did You Know?

A laser can cut into both flat and curved surfaces. Laser marking machines have been designed so that even small pieces of jewelry can have intricate engravings marked on them. For example, machines can engrave the inside of a ring or the back of a watch.

Have your parts laser branded at A.M. Metal Finishing in Orlando. Call us at 407-843-0182 if you need more information.

 

Contact Us

1 + 7 =

7594 Chancellor Drive, Orlando, Florida 32809

407-843-0182

Toll Free 1-888-663-6136

Fax 407-849-1724

Hours of Operation:

Monday - Friday
8:00 a.m. - 4:30 p.m.